How To Install Carpet Runner On Stairs Over Carpet

How To Install Carpet Runner On Stairs Over Carpet – You are here: Home / DIY Home Improvement / Home Improvement / How to Install a Carpet Runner on the Stairs

Hello friends! Today I’m going to show you how to install a carpet runner on your stairs. Installing runner carpet on wooden stairs is an easy and inexpensive job. This can be a quick project of a few hours if you don’t want any prep work. My old stairs hadn’t been touched in years, so I had to do some work before installing my cheap carpet. Below I share how I tackle this step, and how to add carpet sticks to the steps if you want a more elegant look.

How To Install Carpet Runner On Stairs Over Carpet

How To Install Carpet Runner On Stairs Over Carpet

This photo brings back so many memories of this room at Northhouse Lodge as it looked when we first closed it! For those of you who don’t know me, North Home Lodge is my DIY blogger project and rental property in Ludlow, Vermont.

Choosing A Stair Runner: Some Inspiration And Lessons Learned

I have been told that this carpet has been in use since the early 80’s and has been in service forever!

I use affiliate links to help you find the products I used. You can read my full disclosure policy here.

The first thing you need to do is remove the old carpet. It can be dirty and dusty when you remove it, so wear a dust mask if necessary. Remove nails or old nails from steps and posts. Use a clothes pan and bar if necessary.

Clean anything that gets new paint with TSP or green cleaner. Be especially careful with tracks and areas that may have been built up over the years. If you don’t get this spot right, your paint won’t hold up well and may peel or peel.

Installing Sisal Stair Runners — Love & Lilly

I knew better, but for some reason I thought it wouldn’t be a problem. When painting on wood, always use a primer! I really like the Bun Sealer Primer. I used it for a German numbering course on an old chimney brick when it was on its own.

You’d think I would have learned my lesson! Obviously, I didn’t save myself any time because I had to go back and refill all those shells! Yes, paint on shellac always bleeds.

I painted my handle a high gloss black. I like the look of it and it works well on most cars.

How To Install Carpet Runner On Stairs Over Carpet

There are many cheap and fast steps to choose from online and in stores. Pre-made stairs are bought by the round leg or by the yard. When testing the steps to add a runner to the carpet, measure each step and each post. My DIY section starts at the top post before going down and ending at the last post near the bottom. Always order extra so you can cut it around.

How To Install Carpet Runner On Stairs

Big box stores carry carpet runners near the stadium, but the selection is limited. Carpets are easy and inexpensive to find online, and there are many options to choose from. I liked the idea of ​​using a professional runner and found many options online. Traditional shops carry the cups, but they charge you to build the edges, which takes away the budget-friendly part of the project. They are also thin, lightweight and provide padding under the runway.

It didn’t work for me because I wanted a simple, affordable stair runner that I could easily modify.

For the indoor stairs, I choose an indoor and outdoor hall sold at the yard. It will work well and support the decorative style of this part of the house.

The best part about installing your own stair carpet is that you can easily replace it yourself and you won’t have to spend a lot of money if it wears out or doesn’t match your style anymore.

How To Install A Stair Runner

Always start with a fresh cut on your lawn! Don’t think that what you get is big above or below. I promise, it’s not.

Use a double square or something similar to draw a straight line. I used a pair of scissors to cut out the inner circle just like the outer rug. It gave me better control than a knife and a straight point.

Then you will add a stick to the edge line to bind the edge. I found mine near the rug at Home Depot. You can also use the service I found online, I think it will work well too. This is self-explanatory. Remove the backing, place it on the edge of the carpet and press. Fold the corner like my picture below.

How To Install Carpet Runner On Stairs Over Carpet

Take a look at the top of my stairs and you’ll see how the stick looks right along the edge of the carpet. It keeps well and does not fade.

Everything I Learned About Stair Carpet Runners And What We Ended Up Installing (including What It Cost)

Place the rug on the first step, but don’t let it go all the way. Easy to move and change as you work.

Adjust as needed. We have steeper stairs on one side than the upper stairs. This made setting up our stairs difficult. Plan around and compensate for any unevenness in the steps before you glue your carpet! Mine wasn’t in the middle, but it wasn’t there.

Measure your ladder in each direction and mark where your ladder goes up. Start at the top of the post and place your rug on the rug first. Gradually use the top line of your runner, and add the essentials to protect it.

An air compressor caulking gun, also known as a pneumatic caulking gun, is ideal for this job. It is easy to use and not heavy. It can be rented during the day.

Stair Runner Pricing Guide

If you want to use stair runners on your stairs, mix and match the runners on the bottom of the stairs or on the sides of the posts. Place the bottom of the stairs where the beam and step meet, then the side of each step. The cover will not be attached to the sides. It appears to have curved steps.

If you are not using a stair runner on your stairs, then tape the floor with the side posts and down the stairs before attaching the runner to the stair. You will see it in the picture below.

When you are done with the last step, attach the runner to the last post near the bottom. Measure the required length and cut the end by cutting a new cut as a starting point and secure the end with self-adhesive tape.

How To Install Carpet Runner On Stairs Over Carpet

Install carpets after you install your carpet on your wooden steps. Measure the length of the rug’s roots and choose a location.

How To Choose A Carpet Runner For Your Stairs

You will want them to be low steps with the same size on each side. Use the tools that come with the ladder rods. Some stairlifts have a device that connects the riser to the tread. The ladders I used were very cheap and only used screws that were placed under each rung.

Now that I’ve shared how to install a carpet runner on wooden stairs, you can see how easy it can be done in just a few hours. Especially if you don’t have a job to prepare.

Once this is done, it will not be difficult to install a new DIY machine for carpet runners.

This is the third bedroom at North Core Lodge. My DIY stairwell looks great with my DIY painted wood and German plaster wall. I love it and so do our guests.

Installing Stair Runner Diy

This is a great home improvement project that makes a lot of sense. I saved a lot of money paying for expensive carpet and installers. I knew I could install runner carpet on the stairs myself and save a lot of money. Yes, I’m sharing it with you so you can save it too!

Do you have stairs that need new carpet? Tell me all in the comments below guys!

We use cookies to ensure that we provide you with the best possible experience on our website. If you continue to use this website, we assume that you are satisfied with it. Okay, so a few years ago I removed the carpet from our stairs and painted the stairs. Now they look really tired, especially after I removed the razor blades. As I sit in our living room, I can see the stairs and it has been bothering me lately. I knew it was time for a change.

How To Install Carpet Runner On Stairs Over Carpet

When I found this indoor/outdoor rug at an amazing price while searching the internet, I decided to give it a try. I was a little disappointed

How To Install A Stair Runner

0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments